Specifications
DBP-0.25 Specifications
Model | DBP-0.25 | ||
Capacity ( ton ) | 0.25 | ||
Test load ( ton ) | 0.313 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 0.5: 0.17 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 7.8 : 2.6 | |
60 Hz | 9.3 : 3.1 | ||
Headroom ( mm ) | 545 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 900 | ||
Net weight ( kg ) | 65 ( 67 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBP-0.5 Specifications
Model | DBP-0.5 | ||
Capacity ( ton ) | 0.5 | ||
Test load ( ton ) | 0.625 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 0.9 : 0.3 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 7.3 : 2.4 | |
60 Hz | 8.6 : 2.8 | ||
Headroom ( mm ) | 550 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 900 | ||
Net weight ( kg ) | 71 ( 73 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBP-1W Specifications
Model | DBP-1W | ||
Capacity ( ton ) | 1 | ||
Test load ( ton ) | 1.25 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 0.9 : 0.3 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 3.6 : 1.2 | |
60 Hz | 4.3 : 1.4 | ||
Headroom ( mm ) | 715 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 1100 | ||
Net weight ( kg ) | 81 ( 86 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBP-1S Specifications
Model | DBP-1S | ||
Capacity ( ton ) | 1 | ||
Test load ( ton ) | 1.25 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 1.7 : 0.57 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 6.8 : 2.2 | |
60 Hz | 8.2 : 2.7 | ||
Headroom ( mm ) | 595 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 1100 | ||
Net weight ( kg ) | 91 ( 93 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBP-1.5 Specifications
Model | DBP-1.5 | ||
Capacity ( ton ) | 1.5 | ||
Test load ( ton ) | 1.88 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 3.4 : 1.14 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 8.7 : 2.9 | |
60 Hz | 10.3 : 3.4 | ||
Headroom ( mm ) | 725 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 156 ( 160 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBP-2W Specifications
Model | DBP-2W | ||
Capacity ( ton ) | 2 | ||
Test load ( ton ) | 2.5 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 1.7 : 0.57 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 3.4 : 1.1 | |
60 Hz | 4.1 : 1.3 | ||
Headroom ( mm ) | 785 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 111 ( 116 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBP-2S Specifications
Model | DBP-2S | ||
Capacity ( ton ) | 2 | ||
Test load ( ton ) | 2.5 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 3.4 : 1.14 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 6.9 : 2.3 | |
60 Hz | 8.1 : 2.7 | ||
Headroom ( mm ) | 725 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 160 ( 167 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DBP-2.5
| 325 + 2Y
| 227 + Y
| 98 + Y
| 100
| 198
| 174
|
Model
| F
| G
| I
| J
| K
| H
|
DBP-2.5
| 288
| 150
| 372
| 345
| 150.5
| 735
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBP-2.5 Specifications
Model
| DBP-2.5
| ||
Capacity ( ton )
| 2.5
| ||
Test load ( ton )
| 3.13
| ||
Standard lift ( m )
| 3
| 6
| |
Standard push button cord length ( m )
| 2.5
| 5.5
| |
Lifting motor output ( kW ),
( DB ) High : Low speed
| 3.4 : 1.14
| ||
Lifting speed ( m / min )
( DB ) High : Low speed
| 50 Hz
| 5.5 : 1.8
| |
60 Hz
| 6.5 : 2.1
| ||
Headroom ( mm )
| 735
| ||
I-beam
| Width ( mm )
| 100* ・ 125 ・ 150
| |
Minimum radius ( mm )
| 1700
| ||
Net weight ( kg )
| 168
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DBP-3
| 325 + 2Y
| 227 + Y
| 98 + Y
| 100
| 258
| 114
|
Model
| F
| G
| I
| J
| K
| H
|
DBP-3
| 288
| 150
| 372
| 345
| 150.5
| 985
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBP-3 Specifications
Model
| DBP-3
| ||
Capacity ( ton )
| 3
| ||
Test load ( ton )
| 3.75
| ||
Standard lift ( m )
| 4
| ||
Standard push button cord length ( m )
| 3.5
| ||
Lifting motor output ( kW ),
( DB ) High : Low speed
| 3.4 : 1.14
| ||
Lifting speed ( m / min )
( DB ) High : Low speed
| 50 Hz
| 4.35 : 1.4
| |
60 Hz
| 5.15 : 1.7
| ||
Headroom ( mm )
| 985
| ||
I-beam
| Width ( mm )
| 100* ・ 125 ・ 150
| |
Minimum radius ( mm )
| 1700
| ||
Net weight ( kg )
| 185
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DBP-5
| 372 + 2Y
| 248 + Y
| 124 + Y
| 125
| 273
| 102
|
Model
| F
| G
| I
| J
| K
| H
|
DBP-5
| 327
| 169
| 372
| 345
| 167.4
| 1050
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBP-5 Specifications
Model
| DBP-5
| ||
Capacity ( ton )
| 5
| ||
Test load ( ton )
| 6.25
| ||
Standard lift ( m )
| 4
| ||
Standard push button cord length ( m )
| 3.5
| ||
Lifting motor output ( kW ),
( DB ) High : Low speed
| 3.4 : 1.14
| ||
Lifting speed ( m / min )
( DB ) High : Low speed
| 50 Hz
| 2.75 : 0.9
| |
60 Hz
| 3.25 : 1.0
| ||
Headroom ( mm )
| 1050
| ||
I-beam
| Width ( mm )
| 125 ・ 150 ・ 175
| |
Minimum radius ( mm )
| 2300
| ||
Net weight ( kg )
| 221
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply plain trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.