Specifications
DBG-0.25 Dimensions
DBG-0.25 Specifications
Model | DBG-0.25 | ||
Capacity ( ton ) | 0.25 | ||
Test load ( ton ) | 0.313 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ), ( DB ) High : Low speed | 0.5 : 0.17 | ||
Lifting speed ( m / min ) ( DB ) High : Low speed | 50 Hz | 7.8 : 2.6 | |
60 Hz | 9.3 : 3.1 | ||
Trolley Traveling length driven by pulling hand chain 1m ( mm ) | 139 | ||
Hand effort to move geared trolley ( kg ) | 1 | ||
Headroom ( mm ) | 545 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 900 | ||
Net weight ( kg ) | 71 ( 75 ) | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-0.5 Dimensions
DBG-0.5 Specifications
Model | DBG-0.5 | ||
Capacity ( ton ) | 0.5 | ||
Test load ( ton ) | 0.625 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ), ( DB ) High : Low speed | 0.9 : 0.3 | ||
Lifting speed ( m / min ) ( DB ) High : Low speed | 50 Hz | 7.3 : 2.4 | |
60 Hz | 8.6 : 2.8 | ||
Trolley Traveling length driven by pulling hand chain 1m ( mm ) | 139 | ||
Hand effort to move geared trolley ( kg ) | 2 | ||
Headroom ( mm ) | 550 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 900 | ||
Net weight ( kg ) | 77 ( 81 ) | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-1W Dimensions
DBG-1W Specifications
Model | DBG-1W | ||
Capacity ( ton ) | 1 | ||
Test load ( ton ) | 1.25 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ), ( DB ) High : Low speed | 0.9 : 0.3 | ||
Lifting speed ( m / min ) ( DB ) High : Low speed | 50 Hz | 3.6 : 1.2 | |
60 Hz | 4.3 : 1.4 | ||
Trolley Traveling length driven by pulling hand chain 1m ( mm ) | 114 | ||
Hand effort to move geared trolley ( kg ) | 3.5 | ||
Headroom ( mm ) | 715 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 1100 | ||
Net weight ( kg ) | 91 ( 97 ) | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-1S Dimensions
DBG-1S Specifications
Model | DBG-1S | ||
Capacity ( ton ) | 1 | ||
Test load ( ton ) | 1.25 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ), ( DB ) High : Low speed | 1.7 : 0.57 | ||
Lifting speed ( m / min ) ( DB ) High : Low speed | 50 Hz | 6.8 : 2.2 | |
60 Hz | 8.2 : 2.7 | ||
Trolley Traveling length driven by pulling hand chain 1m ( mm ) | 114 | ||
Hand effort to move geared trolley ( kg ) | 3.5 | ||
Headroom ( mm ) | 595 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 1100 | ||
Net weight ( kg ) | 99 ( 105 ) | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-1.5 Dimensions
DBG-1.5 Specifications
Model | DBG-1.5 | ||
Capacity ( ton ) | 1.5 | ||
Test load ( ton ) | 1.88 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ), ( DB ) High : Low speed | 3.4 : 1.14 | ||
Lifting speed ( m / min ) ( DB ) High : Low speed | 50 Hz | 8.7 : 2.9 | |
60 Hz | 10.3 : 3.4 | ||
Trolley Traveling length driven by pulling hand chain 1m ( mm ) | 93 | ||
Hand effort to move geared trolley ( kg ) | 4 | ||
Headroom ( mm ) | 725 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 166 ( 173 ) | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-2W Dimensions
DBG-2W Specifications
Model | DBG-2W | ||
Capacity ( ton ) | 2 | ||
Test load ( ton ) | 2.5 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ), ( DB ) High : Low speed | 1.7 : 0.57 | ||
Lifting speed ( m / min ) ( DB ) High : Low speed | 50 Hz | 3.4 : 1.1 | |
60 Hz | 4.1 : 1.3 | ||
Trolley Traveling length driven by pulling hand chain 1m ( mm ) | 93 | ||
Hand effort to move geared trolley ( kg ) | 5.5 | ||
Headroom ( mm ) | 785 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 120 ( 128 ) | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-2S Dimensions
DBG-2S Specifications
Model | DBG-2S | ||
Capacity ( ton ) | 2 | ||
Test load ( ton ) | 2.5 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ), ( DB ) High : Low speed | 3.4 : 1.14 | ||
Lifting speed ( m / min ) ( DB ) High : Low speed | 50 Hz | 6.9 : 2.3 | |
60 Hz | 8.1 : 2.7 | ||
Trolley Traveling length driven by pulling hand chain 1m ( mm ) | 93 | ||
Hand effort to move geared trolley ( kg ) | 5.5 | ||
Headroom ( mm ) | 725 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 171 ( 179 ) | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-2.5 Dimensions
( H : Headroom )
( mm )
Model | A | B | C | Z | D | E |
DBG-2.5 | 464 + 2Y | 237 + Y | 227 + Y | 100 | 198 | 174 |
Model | F | G | I | J | K | H |
DBG-2.5 | 288 | 150 | 372 | 345 | 164.5 | 735 |
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBG-2.5 Specifications
Model | DBG-2.5 | |
Capacity ( ton ) | 2.5 | |
Test load ( ton ) | 3.13 | |
Standard lift ( m ) | 4 | |
Standard push button cord length ( m ) | 3.5 | |
Lifting motor output ( kW ), ( DB ) High : Low speed | 3.4 : 1.14 | |
Lifting speed ( m / min ) ( DB ) High : Low speed | 50 Hz | 5.5 : 1.8 |
60 Hz | 6.5 : 2.1 | |
Trolley Traveling length driven by pulling hand chain 1m ( mm ) | 97 | |
Hand effort to move geared trolley ( kg ) | 7 | |
Headroom ( mm ) | 735 | |
I-beam | Width ( mm ) | 100* ・ 125 ・ 150 |
Minimum radius ( mm ) | 1700 | |
Net weight ( kg ) | 177 | |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-3 Dimensions
( H : Headroom )
( mm )
Model | A | B | C | Z | D | E |
DBG-3 | 464 + 2Y | 237 + Y | 227 + Y | 100 | 258 | 114 |
Model | F | G | I | J | K | H |
DBG-3 | 288 | 150 | 372 | 345 | 164.5 | 985 |
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBG-3 Specifications
Model | DBG-3 | |
Capacity ( ton ) | 3 | |
Test load ( ton ) | 3.75 | |
Standard lift ( m ) | 4 | |
Standard push button cord length ( m ) | 3.5 | |
Lifting motor output ( kW ), ( DB ) High : Low speed | 3.4 : 1.14 | |
Lifting speed ( m / min ) ( DB ) High : Low speed | 50 Hz | 4.35 : 1.4 |
60 Hz | 5.15 : 1.7 | |
Trolley Traveling length driven by pulling hand chain 1m ( mm ) | 97 | |
Hand effort to move geared trolley ( kg ) | 8 | |
Headroom ( mm ) | 985 | |
I-beam | Width ( mm ) | 100* ・ 125 ・ 150 |
Minimum radius ( mm ) | 1700 | |
Net weight ( kg ) | 194 | |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-5 Dimensions
( H : Headroom )
( mm )
Model | A | B | C | Z | D | E |
DBG-5 | 503 + 2Y | 255 + Y | 248 + Y | 125 | 273 | 102 |
Model | F | G | I | J | K | H |
DBG-5 | 327 | 169 | 372 | 345 | 180 | 1050 |
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBG-5 Specifications
Model | DBG-5 | |
Capacity ( ton ) | 5 | |
Test load ( ton ) | 6.25 | |
Standard lift ( m ) | 4 | |
Standard push button cord length ( m ) | 3.5 | |
Lifting motor output ( kW ), ( DB ) High : Low speed | 3.4 : 1.14 | |
Lifting speed ( m / min ) ( DB ) High : Low speed | 50 Hz | 2.75 : 0.9 |
60 Hz | 3.25 : 1.0 | |
Trolley Traveling length driven by pulling hand chain 1m ( mm ) | 84 | |
Hand effort to move geared trolley ( kg ) | 11.5 | |
Headroom ( mm ) | 1050 | |
I-beam | Width ( mm ) | 125 ・ 150 ・ 175 |
Minimum radius ( mm ) | 2300 | |
Net weight ( kg ) | 231 | |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.