Specifications
DBM-0.25 Dimensions
DBM-0.25 Specifications
Model | DBM-0.25 | |||
Capacity ( ton ) | 0.25 | |||
Test load ( ton ) | 0.313 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ), ( DB ) High : Low Speed | 0.5 : 0.17 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) ( DB ) High : Low Speed | 50Hz | 7.8 : 2.6 | ||
60Hz | 9.3 : 3.1 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 570 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 88 ( 91 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBM-0.5 Dimensions
DBM-0.5 Specifications
Model | DBM-0.5 | |||
Capacity ( ton ) | 0.5 | |||
Test load ( ton ) | 0.625 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ), ( DB ) High : Low Speed | 0.9 : 0.3 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) ( DB ) High : Low Speed | 50Hz | 7.3 : 2.4 | ||
60Hz | 8.6 : 2.8 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 575 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 93 ( 96 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBM-1W Dimensions
DBM-1W Specifications
Model | DBM-1W | |||
Capacity ( ton ) | 1 | |||
Test load ( ton ) | 1.25 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ), ( DB ) High : Low Speed | 0.9 : 0.3 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) ( DB ) High : Low Speed | 50Hz | 3.6 : 1.2 | ||
60Hz | 4.3 : 1.4 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 740 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 113 ( 119 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBM-1S Dimensions
DBM-1S Specifications
Model | DBM-1S | |||
Capacity ( ton ) | 1 | |||
Test load ( ton ) | 1.25 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ), ( DB ) High : Low Speed | 1.7 : 0.57 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) ( DB ) High : Low Speed | 50Hz | 6.8 : 2.2 | ||
60Hz | 8.2 : 2.7 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 620 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 123 ( 126 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBM-1.5 Dimensions
DBM-1.5 Specifications
Model | DBM-1.5 | |||
Capacity ( ton ) | 1.5 | |||
Test load ( ton ) | 1.88 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ), ( DB ) High : Low Speed | 3.4 : 1.14 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) ( DB ) High : Low Speed | 50Hz | 8.7 : 2.9 | ||
60Hz | 10.3 : 3.4 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 735 | |||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1500 ( 800 ) | |||
Net weight ( kg ) | 216 ( 220 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBM-2W Dimensions
DBM-2W Specifications
Model | DBM-2W | |||
Capacity ( ton ) | 2 | |||
Test load ( ton ) | 2.5 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ), ( DB ) High : Low Speed | 1.7 : 0.57 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) ( DB ) High : Low Speed | 50Hz | 3.4 : 1.1 | ||
60Hz | 4.1 : 1.3 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 795 | |||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1500 ( 800 ) | |||
Net weight ( kg ) | 147 ( 153 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBM-2S Dimensions
DBM-2S Specifications
Model | DBM-2S | |||
Capacity ( ton ) | 2 | |||
Test load ( ton ) | 2.5 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ), ( DB ) High : Low Speed | 3.4 : 1.14 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) ( DB ) High : Low Speed | 50Hz | 6.9 : 2.3 | ||
60Hz | 8.1 : 2.7 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 735 | |||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1500 ( 800 ) | |||
Net weight ( kg ) | 220 ( 227 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBM-2.5 Dimensions
( H : Headroom )
( mm )
Model | A | B | C | Z | D | E |
DBM-2.5 | 576 + 2Y | 252 + Y | 324 + Y | 100 | 198 | 174 |
Model | F | G | I | J | K | H |
DBM-2.5 | 316 | 160 | 372 | 345 | 182 | 745 |
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBM-2.5 Specifications
Model | DBM-2.5 | ||
Capacity ( ton ) | 2.5 | ||
Test load ( ton ) | 3.13 | ||
Standard lift ( m ) | 4 | ||
Standard push button cord length ( m ) | 3.5 | ||
Lifting motor output ( kW ), ( DB ) High : Low Speed | 3.4 : 1.14 | ||
Traversing motor output ( kW ) | 0.75 | ||
Lifting speed ( m / min ) ( DB ) High : Low Speed | 50Hz | 5.5 : 1.8 | |
60Hz | 6.5 : 2.1 | ||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 |
Low speed | 50Hz / 60Hz | 10 / 12 | |
Headroom ( mm ) | 745 | ||
I-beam | Width ( mm ) | 100* ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1500 ( 1000 ) | ||
Net weight ( kg ) | 209 | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBM-3 Dimensions
( H : Headroom )
( mm )
Model | A | B | C | Z | D | E |
DBM-3 | 576 + 2Y | 252 + Y | 324 + Y | 100 | 258 | 114 |
Model | F | G | I | J | K | H |
DBM-3 | 316 | 160 | 372 | 345 | 182 | 990 |
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBM-3 Specifications
Model | DBM-3 | ||
Capacity ( ton ) | 3 | ||
Test load ( ton ) | 3.75 | ||
Standard lift ( m ) | 4 | ||
Standard push button cord length ( m ) | 3.5 | ||
Lifting motor output ( kW ), ( DB ) High : Low Speed | 3.4 : 1.14 | ||
Traversing motor output ( kW ) | 0.75 | ||
Lifting speed ( m / min ) ( DB ) High : Low Speed | 50Hz | 4.35 : 1.4 | |
60Hz | 5.15 : 1.7 | ||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 |
Low speed | 50Hz / 60Hz | 10 / 12 | |
Headroom ( mm ) | 990 | ||
I-beam | Width ( mm ) | 100* ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1500 ( 1000 ) | ||
Net weight ( kg ) | 226 | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBM-5 Dimensions
( H : Headroom )
( mm )
Model | A | B | C | Z | D | E |
DBM-5 | 610 + 2Y | 270 + Y | 340 + Y | 125 | 273 | 102 |
Model | F | G | I | J | K | H |
DBM-5 | 336 | 170 | 372 | 345 | 189 | 1055 |
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBM-5 Specifications
Model | DBM-5 | ||
Capacity ( ton ) | 5 | ||
Test load ( ton ) | 6.25 | ||
Standard lift ( m ) | 4 | ||
Standard push button cord length ( m ) | 3.5 | ||
Lifting motor output ( kW ), ( DB ) High : Low Speed | 3.4 : 1.14 | ||
Traversing motor output ( kW ) | 0.75 | ||
Lifting speed ( m / min ) ( DB ) High : Low Speed | 50Hz | 2.75 : 0.9 | |
60Hz | 3.25 : 1.0 | ||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 |
Low speed | 50Hz / 60Hz | 10 / 12 | |
Headroom ( mm ) | 1055 | ||
I-beam | Width ( mm ) | 125 ・ 150 ・ 175 | |
Minimum radius ( mm ) | 2000 ( 1000 ) | ||
Net weight ( kg ) | 263 | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.