Specifications
DAM-0.25 Dimensions
DAM-0.25 Specifications
Model | DAM-0.25 | |||
Capacity ( ton ) | 0.25 | |||
Test load ( ton ) | 0.313 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 0.5 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 7.8 | ||
60Hz | 9.3 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 570 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 74 ( 77 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-0.5 Dimensions
DAM-0.5 Specifications
Model | DAM-0.5 | |||
Capacity ( ton ) | 0.5 | |||
Test load ( ton ) | 0.625 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 0.9 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 7.3 | ||
60Hz | 8.6 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 575 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 77 ( 79 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-1W Dimensions
DAM-1W Specifications
Model | DAM-1W | |||
Capacity ( ton ) | 1 | |||
Test load ( ton ) | 1.25 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 0.9 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 3.6 | ||
60Hz | 4.3 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 740 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 94 ( 102 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-1S Dimensions
DAM-1S Specifications
Model | DAM-1S | |||
Capacity ( ton ) | 1 | |||
Test load ( ton ) | 1.25 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 1.7 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 6.8 | ||
60Hz | 8.2 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 620 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 103 ( 106 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-1.5 Dimensions
DAM-1.5 Specifications
Model | DAM-1.5 | |||
Capacity ( ton ) | 1.5 | |||
Test load ( ton ) | 1.88 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 3.4 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 8.7 | ||
60Hz | 10.3 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 735 | |||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1500 ( 800 ) | |||
Net weight ( kg ) | 195 ( 200 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-2W Dimensions
DAM-2W Specifications
Model | DAM-2W | |||
Capacity ( ton ) | 2 | |||
Test load ( ton ) | 2.5 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 1.7 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 3.4 | ||
60Hz | 4.1 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 795 | |||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1500 ( 800 ) | |||
Net weight ( kg ) | 127 ( 133 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-2S Dimensions
DAM-2S Specifications
Model | DAM-2S | |||
Capacity ( ton ) | 2 | |||
Test load ( ton ) | 2.5 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 3.4 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 6.9 | ||
60Hz | 8.1 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 735 | |||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1500 ( 800 ) | |||
Net weight ( kg ) | 200 ( 206 ) | |||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-2.5 Dimensions
( H : Headroom )
( mm )
Model | A | B | C | Z | D | E |
DAM-2.5 | 576 + 2Y | 252 + Y | 324 + Y | 100 | 198 | 174 |
Model | F | G | I | J | K | H |
DAM-2.5 | 316 | 160 | 342 | 313 | 182 | 745 |
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAM-2.5 Specifications
Model | DAM-2.5 | ||
Capacity ( ton ) | 2.5 | ||
Test load ( ton ) | 3.13 | ||
Standard lift ( m ) | 4 | ||
Standard push button cord length ( m ) | 3.5 | ||
Lifting motor output ( kW ) | 3.4 | ||
Traversing motor output ( kW ) | 0.75 | ||
Lifting speed ( m / min ) | 50Hz | 5.5 | |
60Hz | 6.5 | ||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 |
Low speed | 50Hz / 60Hz | 10 / 12 | |
Headroom ( mm ) | 745 | ||
I-beam | Width ( mm ) | 100* ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1500 ( 1000 ) | ||
Net weight ( kg ) | 192 | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-3 Dimensions
( H : Headroom )
( mm )
Model | A | B | C | Z | D | E |
DAM-3 | 576 + 2Y | 252 + Y | 324 + Y | 100 | 258 | 114 |
Model | F | G | I | J | K | H |
DAM-3 | 316 | 160 | 342 | 313 | 182 | 990 |
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAM-3 Specifications
Model | DAM-3 | ||
Capacity ( ton ) | 3 | ||
Test load ( ton ) | 3.75 | ||
Standard lift ( m ) | 4 | ||
Standard push button cord length ( m ) | 3.5 | ||
Lifting motor output ( kW ) | 3.4 | ||
Traversing motor output ( kW ) | 0.75 | ||
Lifting speed ( m / min ) | 50Hz | 4.35 | |
60Hz | 5.15 | ||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 |
Low speed | 50Hz / 60Hz | 10 / 12 | |
Headroom ( mm ) | 990 | ||
I-beam | Width ( mm ) | 100* ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1500 ( 1000 ) | ||
Net weight ( kg ) | 209 | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-5 Dimensions
( H : Headroom )
( mm )
Model | A | B | C | Z | D | E |
DAM-5 | 610 + 2Y | 270 + Y | 340 + Y | 125 | 273 | 102 |
Model | F | G | I | J | K | H |
DAM-5 | 336 | 170 | 342 | 313 | 189 | 1055 |
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAM-5 Specifications
Model | DAM-5 | ||
Capacity ( ton ) | 5 | ||
Test load ( ton ) | 6.25 | ||
Standard lift ( m ) | 4 | ||
Standard push button cord length ( m ) | 3.5 | ||
Lifting motor output ( kW ) | 3.4 | ||
Traversing motor output ( kW ) | 0.75 | ||
Lifting speed ( m / min ) | 50Hz | 2.75 | |
60Hz | 3.25 | ||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 |
Low speed | 50Hz / 60Hz | 10 / 12 | |
Headroom ( mm ) | 1055 | ||
I-beam | Width ( mm ) | 125 ・ 150 ・ 175 | |
Minimum radius ( mm ) | 2000 ( 1000 ) | ||
Net weight ( kg ) | 246 | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-7.5 Dimensions
( H : Headroom )
( mm )
Model | A | B | C | Z | D | E |
DAM-7.5 | 634 + 2Y | 353 + Y | 281 + Y | 150 | - | - |
Model | F | G | I | J | K | M | H |
DAM-7.5 | 696 | 360 | 342 | 313 | 189 | 798 | 1200 |
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAM-7.5 Specifications
Model | DAM-7.5 | ||
Capacity ( ton ) | 7.5 | ||
Test load ( ton ) | 9.38 | ||
Standard lift ( m ) | 4 | ||
Standard push button cord length ( m ) | 3.5 | ||
Lifting motor output ( kW ) | 3.4 | ||
Traversing motor output ( kW ) | 0.75 x 2 | ||
Lifting speed ( m / min ) | 50Hz | 1.8 | |
60Hz | 2.1 | ||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 |
Low speed | 50Hz / 60Hz | 10 / 12 | |
Headroom ( mm ) | 1200 | ||
I-beam | Width ( mm ) | 150 ・ 175 | |
Minimum radius ( mm ) | Infinity | ||
Net weight ( kg ) | 480 | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-10 Dimensions
( H : Headroom )
( mm )
Model | A | B | C | Z | D | E |
DAM-10 | 634 + 2Y | 353 + Y | 281 + Y | 150 | - | - |
Model | F | G | I | J | K | M | H |
DAM-10 | 696 | 360 | 342 | 342 | 189 | 990 | 1180 |
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAM-10 Specifications
Model | DAM-10 | ||
Capacity ( ton ) | 10 | ||
Test load ( ton ) | 12.5 | ||
Standard lift ( m ) | 4 | ||
Standard push button cord length ( m ) | 3.5 | ||
Lifting motor output ( kW ) | 3.4 x 2 | ||
Traversing motor output ( kW ) | 0.75 x 2 | ||
Lifting speed ( m / min ) | 50Hz | 2.7 | |
60Hz | 3.2 | ||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 |
Low speed | 50Hz / 60Hz | 10 / 12 | |
Headroom ( mm ) | 1180 | ||
I-beam | Width ( mm ) | 150 ・ 175 | |
Minimum radius ( mm ) | Infinity | ||
Net weight ( kg ) | 690 | ||
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.