Specifications
DBG-0.25 Specifications
Model | DBG-0.25 | ||
Capacity ( ton ) | 0.25 | ||
Test load ( ton ) | 0.313 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 0.5 : 0.17 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 7.8 : 2.6 | |
60 Hz | 9.3 : 3.1 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 139 | ||
Hand effort to move geared trolley ( kg ) | 1 | ||
Headroom ( mm ) | 545 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 900 | ||
Net weight ( kg ) | 71 ( 75 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-0.5 Specifications
Model | DBG-0.5 | ||
Capacity ( ton ) | 0.5 | ||
Test load ( ton ) | 0.625 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 0.9 : 0.3 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 7.3 : 2.4 | |
60 Hz | 8.6 : 2.8 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 139 | ||
Hand effort to move geared trolley ( kg ) | 2 | ||
Headroom ( mm ) | 550 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 900 | ||
Net weight ( kg ) | 77 ( 81 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-1W Specifications
Model | DBG-1W | ||
Capacity ( ton ) | 1 | ||
Test load ( ton ) | 1.25 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 0.9 : 0.3 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 3.6 : 1.2 | |
60 Hz | 4.3 : 1.4 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 114 | ||
Hand effort to move geared trolley ( kg ) | 3.5 | ||
Headroom ( mm ) | 715 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 1100 | ||
Net weight ( kg ) | 91 ( 97 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-1S Specifications
Model | DBG-1S | ||
Capacity ( ton ) | 1 | ||
Test load ( ton ) | 1.25 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 1.7 : 0.57 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 6.8 : 2.2 | |
60 Hz | 8.2 : 2.7 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 114 | ||
Hand effort to move geared trolley ( kg ) | 3.5 | ||
Headroom ( mm ) | 595 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 1100 | ||
Net weight ( kg ) | 99 ( 105 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-1.5 Specifications
Model | DBG-1.5 | ||
Capacity ( ton ) | 1.5 | ||
Test load ( ton ) | 1.88 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 3.4 : 1.14 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 8.7 : 2.9 | |
60 Hz | 10.3 : 3.4 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 93 | ||
Hand effort to move geared trolley ( kg ) | 4 | ||
Headroom ( mm ) | 725 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 166 ( 173 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-2W Dimensions
DBG-2W Specifications
Model | DBG-2W | ||
Capacity ( ton ) | 2 | ||
Test load ( ton ) | 2.5 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 1.7 : 0.57 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 3.4 : 1.1 | |
60 Hz | 4.1 : 1.3 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 93 | ||
Hand effort to move geared trolley ( kg ) | 5.5 | ||
Headroom ( mm ) | 785 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 120 ( 128 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DBG-2S Specifications
Model | DBG-2S | ||
Capacity ( ton ) | 2 | ||
Test load ( ton ) | 2.5 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ),
( DB ) High : Low speed | 3.4 : 1.14 | ||
Lifting speed ( m / min )
( DB ) High : Low speed | 50 Hz | 6.9 : 2.3 | |
60 Hz | 8.1 : 2.7 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 93 | ||
Hand effort to move geared trolley ( kg ) | 5.5 | ||
Headroom ( mm ) | 725 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 171 ( 179 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DBG-2.5
| 464 + 2Y
| 237 + Y
| 227 + Y
| 100
| 198
| 174
|
Model
| F
| G
| I
| J
| K
| H
|
DBG-2.5
| 288
| 150
| 372
| 345
| 164.5
| 735
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBG-2.5 Specifications
Model
| DBG-2.5
| |
Capacity ( ton )
| 2.5
| |
Test load ( ton )
| 3.13
| |
Standard lift ( m )
| 4
| |
Standard push button cord length ( m )
| 3.5
| |
Lifting motor output ( kW ),
( DB ) High : Low speed
| 3.4 : 1.14
| |
Lifting speed ( m / min )
( DB ) High : Low speed
| 50 Hz
| 5.5 : 1.8
|
60 Hz
| 6.5 : 2.1
| |
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 97
| |
Hand effort to move geared trolley ( kg )
| 7
| |
Headroom ( mm )
| 735
| |
I-beam
| Width ( mm )
| 100* ・ 125 ・ 150
|
Minimum radius ( mm )
| 1700
| |
Net weight ( kg )
| 177
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DBG-3
| 464 + 2Y
| 237 + Y
| 227 + Y
| 100
| 258
| 114
|
Model
| F
| G
| I
| J
| K
| H
|
DBG-3
| 288
| 150
| 372
| 345
| 164.5
| 985
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBG-3 Specifications
Model
| DBG-3
| |
Capacity ( ton )
| 3
| |
Test load ( ton )
| 3.75
| |
Standard lift ( m )
| 4
| |
Standard push button cord length ( m )
| 3.5
| |
Lifting motor output ( kW ),
( DB ) High : Low speed
| 3.4 : 1.14
| |
Lifting speed ( m / min )
( DB ) High : Low speed
| 50 Hz
| 4.35 : 1.4
|
60 Hz
| 5.15 : 1.7
| |
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 97
| |
Hand effort to move geared trolley ( kg )
| 8
| |
Headroom ( mm )
| 985
| |
I-beam
| Width ( mm )
| 100* ・ 125 ・ 150
|
Minimum radius ( mm )
| 1700
| |
Net weight ( kg )
| 194
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DBG-5
| 503 + 2Y
| 255 + Y
| 248 + Y
| 125
| 273
| 102
|
Model
| F
| G
| I
| J
| K
| H
|
DBG-5
| 327
| 169
| 372
| 345
| 180
| 1050
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DBG-5 Specifications
Model
| DBG-5
| |
Capacity ( ton )
| 5
| |
Test load ( ton )
| 6.25
| |
Standard lift ( m )
| 4
| |
Standard push button cord length ( m )
| 3.5
| |
Lifting motor output ( kW ),
( DB ) High : Low speed
| 3.4 : 1.14
| |
Lifting speed ( m / min )
( DB ) High : Low speed
| 50 Hz
| 2.75 : 0.9
|
60 Hz
| 3.25 : 1.0
| |
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 84
| |
Hand effort to move geared trolley ( kg )
| 11.5
| |
Headroom ( mm )
| 1050
| |
I-beam
| Width ( mm )
| 125 ・ 150 ・ 175
|
Minimum radius ( mm )
| 2300
| |
Net weight ( kg )
| 231
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.