Specifications
αS-006 / αH-006 Specifications
Type
| Single-speed type
| |
Model
| For 100V - 115V*
| αS-006
|
For 200V - 230V*
| αH-006
| |
Capacity ( kg )
| 60
| |
Motor output ( W )
| 300
| |
Short-time rating ( min )
| 25
| |
Repetition ratings
| Load time rate ( % ED )
| 30
|
Max. starting frequency ( times / h )
| 180
| |
Rated current ( A )
| 6 [ 4 ]
| |
Lifting speed ( m / min )
| 13
| |
Standard lift ( m )
| 3
| |
Headroom ( mm )
| 315
| |
Push-button cord length ( m )
| 3
| |
Load chain, diameter x pitch ( mm )
| 4 X 12
| |
Net weight ( kg )
| 15
|
*Specify the voltage you require.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
Specifications and dimensions are subject to change without notice.
αS-01 / αH-01 Specifications
Type
| Single-speed type
| |
Model
| For 100V - 115V*
| αS-01
|
For 200V - 230V*
| αH-01
| |
Capacity ( kg )
| 100
| |
Motor output ( W )
| 300
| |
Short-time rating ( min )
| 25
| |
Repetition ratings
| Load time rate ( % ED )
| 30
|
Max. starting frequency ( times / h )
| 180
| |
Rated current ( A )
| 8 [ 5 ]
| |
Lifting speed ( m / min )
| 13
| |
Standard lift ( m )
| 3
| |
Headroom ( mm )
| 315
| |
Push-button cord length ( m )
| 3
| |
Load chain, diameter x pitch ( mm )
| 4 X 12
| |
Net weight ( kg )
| 15
|
*Specify the voltage you require.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
Specifications and dimensions are subject to change without notice.
αS-016 / αH-016 Specifications
Type
| Single-speed type
| |
Model
| For 100V - 115V*
| αS-016
|
For 200V - 230V*
| αH-016
| |
Capacity ( kg )
| 160
| |
Motor output ( W )
| 600
| |
Short-time rating ( min )
| 25
| |
Repetition ratings
| Load time rate ( % ED )
| 30
|
Max. starting frequency ( times / h )
| 180
| |
Rated current ( A )
| 14 [ 7 ]
| |
Lifting speed ( m / min )
| 15
| |
Standard lift ( m )
| 3
| |
Headroom ( mm )
| 315
| |
Push-button cord length ( m )
| 3
| |
Load chain, diameter x pitch ( mm )
| 4 X 12
| |
Net weight ( kg )
| 17
|
*Specify the voltage you require.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
Specifications and dimensions are subject to change without notice.
αS-025 / αH-025 Specifications
Type
| Single-speed type
| |
Model
| For 100V - 115V*
| αS-025
|
For 200V - 230V*
| αH-025
| |
Capacity ( kg )
| 250
| |
Motor output ( W )
| 600
| |
Short-time rating ( min )
| 25
| |
Repetition ratings
| Load time rate ( % ED )
| 30
|
Max. starting frequency ( times / h )
| 180
| |
Rated current ( A )
| 14 [ 7 ]
| |
Lifting speed ( m / min )
| 10
| |
Standard lift ( m )
| 3
| |
Headroom ( mm )
| 315
| |
Push-button cord length ( m )
| 3
| |
Load chain, diameter x pitch ( mm )
| 4 X 12
| |
Net weight ( kg )
| 17
|
*Specify the voltage you require.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
Specifications and dimensions are subject to change without notice.
αS-05 / αH-05 Specifications
Type
| Single-speed type
| |
Model
| For 100V - 115V*
| αS-05
|
For 200V - 230V*
| αH-05
| |
Capacity ( kg )
| 500
| |
Motor output ( W )
| 600
| |
Short-time rating ( min )
| 25
| |
Repetition ratings
| Load time rate ( % ED )
| 30
|
Max. starting frequency ( times / h )
| 180
| |
Rated current ( A )
| 14 [ 7 ]
| |
Lifting speed ( m / min )
| 5
| |
Standard lift ( m )
| 3
| |
Headroom ( mm )
| 395
| |
Push-button cord length ( m )
| 3
| |
Load chain, diameter x pitch ( mm )
| 4 X 12
| |
Net weight ( kg )
| 19.5
|
*Specify the voltage you require.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
Specifications and dimensions are subject to change without notice.
αSB-006 / αHB-006 Specifications
Type
| Dual-speed type
| |
Model
| For 100V - 115V*
| αSB-006
|
For 200V - 230V*
| αHB-006
| |
Capacity ( kg )
| 60
| |
Motor output ( W )
| 300
| |
Short-time rating ( min )
| 25
| |
Repetition ratings
| Load time rate ( % ED )
| 30
|
Max. starting frequency ( times / h )
| 180
| |
Rated current ( A )
| 6 [ 4 ]
| |
Lifting speed ( m / min )
| Low - speed 5
High - speed 13
| |
Standard lift ( m )
| 3
| |
Headroom ( mm )
| 315
| |
Push-button cord length ( m )
| 3
| |
Load chain, diameter x pitch ( mm )
| 4 X 12
| |
Net weight ( kg )
| 15
|
*Specify the voltage you require.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
Specifications and dimensions are subject to change without notice.
αSB-01 / αHB-01 Specifications
Type
| Dual-speed type
| |
Model
| For 100V - 115V*
| αSB-01
|
For 200V - 230V*
| αHB-01
| |
Capacity ( kg )
| 100
| |
Motor output ( W )
| 300
| |
Short-time rating ( min )
| 25
| |
Repetition ratings
| Load time rate ( % ED )
| 30
|
Max. starting frequency ( times / h )
| 180
| |
Rated current ( A )
| 8 [ 5 ]
| |
Lifting speed ( m / min )
| Low - speed 4
High - speed 13
| |
Standard lift ( m )
| 3
| |
Headroom ( mm )
| 315
| |
Push-button cord length ( m )
| 3
| |
Load chain, diameter x pitch ( mm )
| 4 X 12
| |
Net weight ( kg )
| 15
|
*Specify the voltage you require.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
Specifications and dimensions are subject to change without notice.
αSB-016 / αHB-016 Specifications
Type
| Dual-speed type
| |
Model
| For 100V - 115V*
| αSB-016
|
For 200V - 230V*
| αHB-016
| |
Capacity ( kg )
| 160
| |
Motor output ( W )
| 600
| |
Short-time rating ( min )
| 25
| |
Repetition ratings
| Load time rate ( % ED )
| 30
|
Max. starting frequency ( times / h )
| 180
| |
Rated current ( A )
| 14 [ 7 ]
| |
Lifting speed ( m / min )
| Low - speed 5
High - speed 15
| |
Standard lift ( m )
| 3
| |
Headroom ( mm )
| 315
| |
Push-button cord length ( m )
| 3
| |
Load chain, diameter x pitch ( mm )
| 4 X 12
| |
Net weight ( kg )
| 17
|
*Specify the voltage you require.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
Specifications and dimensions are subject to change without notice.
αSB-025 / αHB-025 Specifications
Type
| Dual-speed type
| |
Model
| For 100V - 115V*
| αSB-025
|
For 200V - 230V*
| αHB-025
| |
Capacity ( kg )
| 250
| |
Motor output ( W )
| 600
| |
Short-time rating ( min )
| 25
| |
Repetition ratings
| Load time rate ( % ED )
| 30
|
Max. starting frequency ( times / h )
| 180
| |
Rated current ( A )
| 14 [ 7 ]
| |
Lifting speed ( m / min )
| Low - speed 4
High - speed 10
| |
Standard lift ( m )
| 3
| |
Headroom ( mm )
| 315
| |
Push-button cord length ( m )
| 3
| |
Load chain, diameter x pitch ( mm )
| 4 X 12
| |
Net weight ( kg )
| 17
|
*Specify the voltage you require.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
Specifications and dimensions are subject to change without notice.
αSB-05 / αHB-05 Specifications
Type
| Dual-speed type
| |
Model
| For 100V - 115V*
| αSB-05
|
For 200V - 230V*
| αHB-05
| |
Capacity ( kg )
| 500
| |
Motor output ( W )
| 600
| |
Short-time rating ( min )
| 25
| |
Repetition ratings
| Load time rate ( % ED )
| 30
|
Max. starting frequency ( times / h )
| 180
| |
Rated current ( A )
| 14 [ 7 ]
| |
Lifting speed ( m / min )
| Low - speed 2
High - speed 5
| |
Standard lift ( m )
| 3
| |
Headroom ( mm )
| 395
| |
Push-button cord length ( m )
| 3
| |
Load chain, diameter x pitch ( mm )
| 4 X 12
| |
Net weight ( kg )
| 20
|
*Specify the voltage you require.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
1 ) A power source cable ( 2 m㎡ x 3 Core wires ) 5m is included for single phase.
2 ) Figure in [ ] shows that of αH type.
3 ) Power supply voltage for operating the push-button switch is 100V ( or 200V ) single phase.
4 ) 500kg type is also available to supply the equipment for 490kg.
Specifications and dimensions are subject to change without notice.