Specifications
DAG-0.25 Specifications
Model | DAG-0.25 | ||
Capacity ( ton ) | 0.25 | ||
Test load ( ton ) | 0.313 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ) | 0.5 | ||
Lifting speed ( m / min ) | 50 Hz | 7.8 | |
60 Hz | 9.3 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 139 | ||
Hand effort to move geared trolley ( kg ) | 1 | ||
Headroom ( mm ) | 545 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 900 | ||
Net weight ( kg ) | 66 ( 69 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAG-0.5 Specifications
Model | DAG-0.5 | ||
Capacity ( ton ) | 0.5 | ||
Test load ( ton ) | 0.625 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ) | 0.9 | ||
Lifting speed ( m / min ) | 50 Hz | 7.3 | |
60 Hz | 8.6 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 139 | ||
Hand effort to move geared trolley ( kg ) | 2 | ||
Headroom ( mm ) | 550 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 900 | ||
Net weight ( kg ) | 70 ( 75 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAG-1W Specifications
Model | DAG-1W | ||
Capacity ( ton ) | 1 | ||
Test load ( ton ) | 1.25 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ) | 0.9 | ||
Lifting speed ( m / min ) | 50 Hz | 3.6 | |
60 Hz | 4.3 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 114 | ||
Hand effort to move geared trolley ( kg ) | 3.5 | ||
Headroom ( mm ) | 715 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 1100 | ||
Net weight ( kg ) | 85 ( 91 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAG-1S Specifications
Model | DAG-1S | ||
Capacity ( ton ) | 1 | ||
Test load ( ton ) | 1.25 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ) | 1.7 | ||
Lifting speed ( m / min ) | 50 Hz | 6.8 | |
60 Hz | 8.2 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 114 | ||
Hand effort to move geared trolley ( kg ) | 3.5 | ||
Headroom ( mm ) | 595 | ||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 | |
Minimum radius ( mm ) | 1100 | ||
Net weight ( kg ) | 92 ( 97 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAG-1.5 Specifications
Model | DAG-1.5 | ||
Capacity ( ton ) | 1.5 | ||
Test load ( ton ) | 1.88 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ) | 3.4 | ||
Lifting speed ( m / min ) | 50 Hz | 8.7 | |
60 Hz | 10.3 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 93 | ||
Hand effort to move geared trolley ( kg ) | 4 | ||
Headroom ( mm ) | 725 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 149 ( 156 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAG-2W Specifications
Model | DAG-2W | ||
Capacity ( ton ) | 2 | ||
Test load ( ton ) | 2.5 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ) | 1.7 | ||
Lifting speed ( m / min ) | 50 Hz | 3.4 | |
60 Hz | 4.1 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 93 | ||
Hand effort to move geared trolley ( kg ) | 5.5 | ||
Headroom ( mm ) | 785 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 113 ( 120 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAG-2S Specifications
Model | DAG-2S | ||
Capacity ( ton ) | 2 | ||
Test load ( ton ) | 2.5 | ||
Standard lift ( m ) | 4 | 6 | |
Lifting motor output ( kW ) | 3.4 | ||
Lifting speed ( m / min ) | 50 Hz | 6.9 | |
60 Hz | 8.1 | ||
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 93 | ||
Hand effort to move geared trolley ( kg ) | 5.5 | ||
Headroom ( mm ) | 725 | ||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | |
Minimum radius ( mm ) | 1200 | ||
Net weight ( kg ) | 154 ( 162 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DAG-2.5
| 464 + 2Y
| 237 + Y
| 227 + Y
| 100
| 198
| 174
|
Model
| F
| G
| I
| J
| K
| H
|
DAG-2.5
| 288
| 150
| 342
| 313
| 164.5
| 735
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAG-2.5 Specifications
Model
| DAG-2.5
| |
Capacity ( ton )
| 2.5
| |
Test load ( ton )
| 3.13
| |
Standard lift ( m )
| 4
| |
Standard push button cord length ( m )
| 3.5
| |
Lifting motor output ( kW )
| 3.4
| |
Lifting speed ( m / min )
| 50 Hz
| 5.5
|
60 Hz
| 6.5
| |
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 97
| |
Hand effort to move geared trolley ( kg )
| 7
| |
Headroom ( mm )
| 735
| |
I-beam
| Width ( mm )
| 100* ・ 125 ・ 150
|
Minimum radius ( mm )
| 1700
| |
Net weight ( kg )
| 161
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DAG-3
| 464 + 2Y
| 237 + Y
| 227 + Y
| 100
| 258
| 114
|
Model
| F
| G
| I
| J
| K
| H
|
DAG-3
| 288
| 150
| 342
| 313
| 164.5
| 985
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAG-3 Specifications
Model
| DAG-3
| |
Capacity ( ton )
| 3
| |
Test load ( ton )
| 3.75
| |
Standard lift ( m )
| 4
| |
Standard push button cord length ( m )
| 3.5
| |
Lifting motor output ( kW )
| 3.4
| |
Lifting speed ( m / min )
| 50 Hz
| 4.35
|
60 Hz
| 5.15
| |
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 97
| |
Hand effort to move geared trolley ( kg )
| 8
| |
Headroom ( mm )
| 985
| |
I-beam
| Width ( mm )
| 100* ・ 125 ・ 150
|
Minimum radius ( mm )
| 1700
| |
Net weight ( kg )
| 178
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DAG-5
| 503 + 2Y
| 255 + Y
| 248 + Y
| 125
| 273
| 102
|
Model
| F
| G
| I
| J
| K
| H
|
DAG-5
| 327
| 169
| 342
| 313
| 180
| 1050
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAG-5 Specifications
Model
| DAG-5
| |
Capacity ( ton )
| 5
| |
Test load ( ton )
| 6.25
| |
Standard lift ( m )
| 4
| |
Standard push button cord length ( m )
| 3.5
| |
Lifting motor output ( kW )
| 3.4
| |
Lifting speed ( m / min )
| 50 Hz
| 2.75
|
60 Hz
| 3.25
| |
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 84
| |
Hand effort to move geared trolley ( kg )
| 11.5
| |
Headroom ( mm )
| 1050
| |
I-beam
| Width ( mm )
| 125 ・ 150 ・ 175
|
Minimum radius ( mm )
| 2300
| |
Net weight ( kg )
| 214
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DAG-7.5
| 597
| 443.5 + Y | 153.5 - Y
| 150
| -
| -
|
Model
| F
| G
| I
| J
| K
| M
| H
|
DAG-7.5
| 687
| 360
| 342
| 313
| 179
| 793
| 1190
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAG-7.5 Specifications
Model
| DAG-7.5
| |
Capacity ( ton )
| 7.5
| |
Test load ( ton )
| 9.38
| |
Standard lift ( m )
| 4
| |
Standard push button cord length ( m )
| 3.5
| |
Lifting motor output ( kW )
| 3.4
| |
Lifting speed ( m / min )
| 50 Hz
| 1.8
|
60 Hz
| 2.1
| |
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 66
| |
Hand effort to move geared trolley ( kg )
| 15
| |
Headroom ( mm )
| 1190
| |
I-beam
| Width ( mm )
| 150 ・ 175
|
Minimum radius ( mm )
| Infinity
| |
Net weight ( kg )
| 374
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DAG-10
| 584
| 430.5 + Y
| 153.5 - Y
| 150
| -
| -
|
Model
| F
| G
| I
| J
| K
| M
| H
|
DAG-10
| 687
| 360
| 342
| 342
| 179
| 960
| 1170
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAG-10 Specifications
Model
| DAG-10
| |
Capacity ( ton )
| 10
| |
Test load ( ton )
| 12.5
| |
Standard lift ( m )
| 4
| |
Standard push button cord length ( m )
| 3.5
| |
Lifting motor output ( kW )
| 3.4 x 2
| |
Lifting speed ( m / min )
| 50 Hz
| 2.7
|
60 Hz
| 3.2
| |
Trolley Traveling length driven
by pulling hand chain 1m ( mm )
| 66
| |
Hand effort to move geared trolley ( kg )
| 19
| |
Headroom ( mm )
| 1170
| |
I-beam
| Width ( mm )
| 150 ・ 175
|
Minimum radius ( mm )
| Infinity
| |
Net weight ( kg )
| 513
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-5m in case of 2 push button, 7 core-5m in case of 4 push button.
3 ) When you need 4 push button for crane instead of 2 push button, "C" should be added to the end of model name.
4 ) We can supply geared trolley of which I beam width is special.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.