Specifications
DAM-0.25 Specifications
Model | DAM-0.25 | |||
Capacity ( ton ) | 0.25 | |||
Test load ( ton ) | 0.313 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 0.5 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 7.8 | ||
60Hz | 9.3 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 570 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 74 ( 77 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-0.5 Specifications
Model | DAM-0.5 | |||
Capacity ( ton ) | 0.5 | |||
Test load ( ton ) | 0.625 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 0.9 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 7.3 | ||
60Hz | 8.6 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 575 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 77 ( 79 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-1W Specifications
Model | DAM-1W | |||
Capacity ( ton ) | 1 | |||
Test load ( ton ) | 1.25 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 0.9 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 3.6 | ||
60Hz | 4.3 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 740 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 94 ( 102 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-1S Specifications
Model | DAM-1S | |||
Capacity ( ton ) | 1 | |||
Test load ( ton ) | 1.25 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 1.7 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 6.8 | ||
60Hz | 8.2 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 620 | |||
I-beam | Width ( mm ) | 75 ・ 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1100 ( 800 ) | |||
Net weight ( kg ) | 103 ( 106 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-1.5 Specifications
Model | DAM-1.5 | |||
Capacity ( ton ) | 1.5 | |||
Test load ( ton ) | 1.88 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 3.4 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 8.7 | ||
60Hz | 10.3 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 735 | |||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1500 ( 800 ) | |||
Net weight ( kg ) | 195 ( 200 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-2W Specifications
Model | DAM-2W | |||
Capacity ( ton ) | 2 | |||
Test load ( ton ) | 2.5 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 1.7 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 3.4 | ||
60Hz | 4.1 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 795 | |||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1500 ( 800 ) | |||
Net weight ( kg ) | 127 ( 133 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
DAM-2S Specifications
Model | DAM-2S | |||
Capacity ( ton ) | 2 | |||
Test load ( ton ) | 2.5 | |||
Standard lift ( m ) | 4 | 6 | ||
Lifting motor output ( kW ) | 3.4 | |||
Traversing motor output ( kW ) | 0.4 | |||
Lifting speed ( m / min ) | 50Hz | 6.9 | ||
60Hz | 8.1 | |||
Traversing speed ( m / min ) | High speed | 50Hz / 60Hz | 20 / 24 | |
Low speed | 50Hz / 60Hz | 10 / 12 | ||
Headroom ( mm ) | 735 | |||
I-beam | Width ( mm ) | 100 ・ 125 ・ 150 | ||
Minimum radius ( mm ) | 1500 ( 800 ) | |||
Net weight ( kg ) | 200 ( 206 ) |
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DAM-2.5
| 576 + 2Y
| 252 + Y
| 324 + Y
| 100
| 198
| 174
|
Model
| F
| G
| I
| J
| K
| H
|
DAM-2.5
| 316
| 160
| 342
| 313
| 182
| 745
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAM-2.5 Specifications
Model
| DAM-2.5
| ||
Capacity ( ton )
| 2.5
| ||
Test load ( ton )
| 3.13
| ||
Standard lift ( m )
| 4
| ||
Standard push button cord length ( m )
| 3.5
| ||
Lifting motor output ( kW )
| 3.4
| ||
Traversing motor output ( kW )
| 0.75
| ||
Lifting speed ( m / min )
| 50Hz
| 5.5
| |
60Hz
| 6.5
| ||
Traversing speed ( m / min )
| High speed
| 50Hz / 60Hz
| 20 / 24
|
Low speed
| 50Hz / 60Hz
| 10 / 12
| |
Headroom ( mm )
| 745
| ||
I-beam
| Width ( mm )
| 100* ・ 125 ・ 150
| |
Minimum radius ( mm )
| 1500 ( 1000 )
| ||
Net weight ( kg )
| 192
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DAM-3
| 576 + 2Y
| 252 + Y
| 324 + Y
| 100
| 258
| 114
|
Model
| F
| G
| I
| J
| K
| H
|
DAM-3
| 316
| 160
| 342
| 313
| 182
| 990
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAM-3 Specifications
Model
| DAM-3
| ||
Capacity ( ton )
| 3
| ||
Test load ( ton )
| 3.75
| ||
Standard lift ( m )
| 4
| ||
Standard push button cord length ( m )
| 3.5
| ||
Lifting motor output ( kW )
| 3.4
| ||
Traversing motor output ( kW )
| 0.75
| ||
Lifting speed ( m / min )
| 50Hz
| 4.35
| |
60Hz
| 5.15
| ||
Traversing speed ( m / min )
| High speed
| 50Hz / 60Hz
| 20 / 24
|
Low speed
| 50Hz / 60Hz
| 10 / 12
| |
Headroom ( mm )
| 990
| ||
I-beam
| Width ( mm )
| 100* ・ 125 ・ 150
| |
Minimum radius ( mm )
| 1500 ( 1000 )
| ||
Net weight ( kg )
| 209
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DAM-5
| 610 + 2Y
| 270 + Y
| 340 + Y
| 125
| 273
| 102
|
Model
| F
| G
| I
| J
| K
| H
|
DAM-5
| 336
| 170
| 342
| 313
| 189
| 1055
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAM-5 Specifications
Model
| DAM-5
| ||
Capacity ( ton )
| 5
| ||
Test load ( ton )
| 6.25
| ||
Standard lift ( m )
| 4
| ||
Standard push button cord length ( m )
| 3.5
| ||
Lifting motor output ( kW )
| 3.4
| ||
Traversing motor output ( kW )
| 0.75
| ||
Lifting speed ( m / min )
| 50Hz
| 2.75
| |
60Hz
| 3.25
| ||
Traversing speed ( m / min )
| High speed
| 50Hz / 60Hz
| 20 / 24
|
Low speed
| 50Hz / 60Hz
| 10 / 12
| |
Headroom ( mm )
| 1055
| ||
I-beam
| Width ( mm )
| 125 ・ 150 ・ 175
| |
Minimum radius ( mm )
| 2000 ( 1000 )
| ||
Net weight ( kg )
| 246
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DAM-7.5
| 634 + 2Y
| 353 + Y
| 281 + Y
| 150
| -
| -
|
Model
| F
| G
| I
| J
| K
| M
| H
|
DAM-7.5
| 696
| 360
| 342
| 313
| 189
| 798
| 1200
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAM-7.5 Specifications
Model
| DAM-7.5
| ||
Capacity ( ton )
| 7.5
| ||
Test load ( ton )
| 9.38
| ||
Standard lift ( m )
| 4
| ||
Standard push button cord length ( m )
| 3.5
| ||
Lifting motor output ( kW )
| 3.4
| ||
Traversing motor output ( kW )
| 0.75 x 2
| ||
Lifting speed ( m / min )
| 50Hz
| 1.8
| |
60Hz
| 2.1
| ||
Traversing speed ( m / min )
| High speed
| 50Hz / 60Hz
| 20 / 24
|
Low speed
| 50Hz / 60Hz
| 10 / 12
| |
Headroom ( mm )
| 1200
| ||
I-beam
| Width ( mm )
| 150 ・ 175
| |
Minimum radius ( mm )
| Infinity
| ||
Net weight ( kg )
| 480
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
( mm )
Model
| A
| B
| C
| Z
| D
| E
|
DAM-10
| 634 + 2Y
| 353 + Y
| 281 + Y
| 150
| -
| -
|
Model
| F
| G
| I
| J
| K
| M
| H
|
DAM-10
| 696
| 360
| 342
| 342
| 189
| 990
| 1180
|
1 ) The dimensions D , E depends on the lift.
2 ) For the dimensions Y and Z, see here.
3 ) The dimension K is in case of that "I-beam Width ( mm )" is maximum.
DAM-10 Specifications
Model
| DAM-10
| ||
Capacity ( ton )
| 10
| ||
Test load ( ton )
| 12.5
| ||
Standard lift ( m )
| 4
| ||
Standard push button cord length ( m )
| 3.5
| ||
Lifting motor output ( kW )
| 3.4 x 2
| ||
Traversing motor output ( kW )
| 0.75 x 2
| ||
Lifting speed ( m / min )
| 50Hz
| 2.7
| |
60Hz
| 3.2
| ||
Traversing speed ( m / min )
| High speed
| 50Hz / 60Hz
| 20 / 24
|
Low speed
| 50Hz / 60Hz
| 10 / 12
| |
Headroom ( mm )
| 1180
| ||
I-beam
| Width ( mm )
| 150 ・ 175
| |
Minimum radius ( mm )
| Infinity
| ||
Net weight ( kg )
| 690
|
1 ) The number bracketed in "Net weight ( kg )" indicates 6m lift.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.
2 ) The length of power cord in standard is 4 core-0.5m in case of 4 push button, 7 core-0.5m in case of 6 push button.
3 ) When you need 6 push button for crane instead of 4 push button, "C" should be added to the end of model name.
4 ) We can supply the special electric trolley of which "Trolley mini radius" is the number bracketed off.
*mark--When you install more than 2.5 ton chain block to I beam width 100mm, please note that the strength of the rail may not be enough depends on the span.